Chiseling
-
Chisel Bit Set SDS+: 5.5, 6 x 110mm; 8, 10 and 12 x 160mm; 14, 16 x 210mm; 18 x 300mm and 20 x 450mm. Chisels: 1 x point, 1 x flat and 1 x groove. In sturdy case.
Product ID: 633750
-
New Makita SDS Steels have been through a performance enhancing change, Extra high resistance to wear and deformation has been achieved with induction hardening extending efficient life time by 30%, Testing has shown material removal rates have also been increased by over 15%.
Product ID: D-19168
-
This Chisel is not for concrete, but is great for cutting asphalt and hard ground like abou.
Product ID: 751620-A
Width: 5″
Length: 17-1/2″
-
This bit is for the demolition application in concrete. Also used for work around pipes, wires & conduits.
Product ID: D-17631
Length: 16″
-
General purpose chipping, edging and channeling. To be used for chiseling out chases and deeper, rough spots.
Product ID: D-17647
Length: 16″
-
Much faster general purpose chiseling, edging and channeling. To be used for chiseling out chases and deeper, rough spots.
Product ID: D-29228
Width: 3″
Length: 16″ -
General purpose chipping, edging and channeling. To be used for chiseling out chases and deeper, rough spots.
Product ID: 751231-A
Width: 1″
Length: 18″
-
Demolition application and start hole in concrete. Also used for work around pipes, wires & conduits.
Product ID: 751424-A
Length: 18″
-
Wide chisel with two cutting angles for chipping dried concrete. This wider bit provides the worker with speed. Fast removal of brick and mortar work means the job gets done faster.
Product ID: 751235-A
Width: 1-1/2”
Length: 12″
-
Wide chisel with two cutting angles for chipping dried concrete. This wider bit provides the worker with speed. Fast removal of brick and mortar work means the job gets done faster.
Product ID: 751230-A
Width: 3″
Length: 12″
-
These bits are ideal for fastening work with metal screws, auto drilling and long wood screws.
Product ID: D-16368
Sizes: 2x Bull Point, 2x 3/4” Chisel & 1x 1-1/2” Chisel
-
This bit is when used for chiseling out chases and deeper, rough spots.
Product ID: D-08729
Length: 10″
-
The perfect bit to use for fine chiseling work around pipes, wires & conduits.
Product ID: D-08713
Length: 10″
-
This wider bit provides the worker with speed. Fast removal of brick and mortar work means the job gets done faster.
Product ID: A-30483
Length: 10″
