Hardware
-
-
Product ID:#HWPS
Green PVC with white internal helix.
Smooth wall and interior.
Length: bulk 100ft, (Sold per 10ft lots)
Abrasion resistant
-
Product ID:#PWP2HX
Honda GX 120 engines with Oil Alert for extra reliability.
Protective metal roll cage give added strength for everyday jobsite use
Cast-aluminum pump housing offers protection & portability
Handles solids up to ¼ (7mm) in diameter
Carbon ceramic mechanical seal.
Cast iron impeller and volute
-
-
Product ID:#PWP3HX
Honda GX 160 engines with Oil Alert for extra reliability.
Protective metal roll cage give added strength for everyday jobsite use.
Cast-aluminum pump housing offers protection & portability.
Handles solids up to ¼ (7mm) in diameter.
Carbon ceramic mechanical seal
Cast iron impeller and volute.
-
Approximately 300pce set including 7 x metal drills (2-10mm), 5 x wood drills (4-10mm), 5 x masonry drills (4-10mm), 6 x screwdriver bits (2 x slotted, 2 x Phillips, 2 x PZD), 1 x magnetic bit holder plus a selection of 5, 6, 8 and 10mm wall plugs.
Product ID: DS20
-
Keep on top of your work with bulk buying! These bits are ideal for fastening work with metal screws, auto drilling and long wood screws.
Product ID: B-26559 -
Designed to fit to most corded & cordless drills, these top quality wire brushes remove rust, paint and a host of different coatings from both timber and metal surfaces. Each brush has long lasting hardened brass steel wire bristles.
Product ID: 1801563
-
4-1/2” Bosch Plastic Baking pad, fits most 220v 4-1/2” angle grinders and sanders with max RPM 13000 c/w M14mm arbor flange nut.
Product ID: 2610-906-278
-
7” Bosch Rubber Baking pad, fits most 120v 7” angle grinders and sanders with max RPM 8500 c/w 5/8”x11” arbor flange nut.
Product ID: 2610-906-328
-
-
Chisel Bit Set SDS+: 5.5, 6 x 110mm; 8, 10 and 12 x 160mm; 14, 16 x 210mm; 18 x 300mm and 20 x 450mm. Chisels: 1 x point, 1 x flat and 1 x groove. In sturdy case.
Product ID: 633750
-
New Makita SDS Steels have been through a performance enhancing change, Extra high resistance to wear and deformation has been achieved with induction hardening extending efficient life time by 30%, Testing has shown material removal rates have also been increased by over 15%.
Product ID: D-19168
-
Product ID: CYT12CHF
Safely stores your industrial or medical gas cylinders for ease of mobility and keeps them safely strapped in reducing the risk of fall over accidents that could be fatal; features large 12” solid rubber wheels and a convenient tool storage tray.
-
-
Featuring 8mm continuous rim, fine cut, high concentration, s-slot cool cutting, s-detenso silencing. Cuts all tiles – guaranteed!
Product ID: SL-PRO
-
Free!
Fast cutting universal blade, with 10mm segment. Features super fast turbo segment and cooling holes. CUTS IT ALL – GUARANTEED.
-
Product ID: 120448
The ECO I-55 pallet truck is the world’s most popular pallet truck featuring a quality German pump design for long shelf life and easy field servicing. 200 degree handle pivot provides exceptional maneuverability, with standard polyurethane wheels and rollers for transport ease. The I55 features a powder coat finish, robotic welds throughout and grease fittings at all pivot points for easy maintenance, ideal for lifting loads up to 5,500Lbs
-
Aluminous Oxide wheels are for general purpose grinding of Carbon/Mild and many Alloy steels, fits CLARK 6500532 bench grinder.
Product ID: 6501042
-
Aluminous Oxide wheels are for general purpose grinding of Carbon/Mild and many Alloy steels, fits CLARK 6500532 bench grinder.
Product ID: 6501040
-
Typically used with a 7” angle sander, this hook & loop type sanding disc fits neatly with the 582398 H&L backing pad and is great for sanding large flat surfaces.
Product ID: HLD7G
-
Firm backing pad for use with hook and loop polishing sponges, bonnets and sanding discs. Compatible with angle grinders and sander polishers. M14 x 2 female threads. Max 8500rpm.
Product ID: #582398
-
Free!
These are our best selling conical flap disc, offering extremely good value for money with long life and rapid stock removal giving the tradesman a greater opportunity to be profitable.
-
Product ID:#BTD142
Features:
Variable 2 speed design covers a wide range of drilling and driving applications
Ultra compact design at 7 7/16″ long for reduced operator fatigue
Built in L.E.D. light illuminates the work area
Lithium Ion Batteries – provide longer run time and lower self-discharge
Ergonomic shape fits like a glove for even pressure and easy control
Soft grip handle provides increased comfort on the job
3 year warranty on tool and 1 year warranty on batteries and chargerModel Number:BTD142 HW
-
Product ID: M1901G
240Volt
- This M1901G MAKITA MT professional series planer is ideal for the skilled or professional tradesman looking for an economically simple but solid quality planer to get the job done efficiently, ideal for carpenters and joiners.
-
Product ID: MSS702
240Volt
This powerful 1050W MAKITA MT Professional circular saw with it’s 7-14″ carbide tip blade is ideal for the skilled or professional tradesman looking for a simple, reliable, tough but economical power saw option typically used by carpenters and joiners alike.
-
Product ID: M8100G
240Volt
This MAKITA MT Professional series 710w 1/2″ hammer drill is ideal for the cost conscious skilled or professional tradesman, such as carpenters, electricians, plumbers and fitters, who want something simple dependable, tough and economical.
-
Product ID: M8700G
240Volt
This M8700G MAKITA MT professional series rotary hammer drill is ideal for the serious tradesman or professional looking for an economically simple but solid rotary hammer drill for drilling in tough and regular grade masonry along with light masonry chipping requirements.
-
Product ID: M9204
240Volt
This M9204 5″ MAKITA MT Professional series Random Orbit Sander is great for the serious skilled tradesman or professional who is looking for an economical simple but solid sander for finishing work typically used by carpenters, marine re-finishers, auto-body re-finishers and joiners, the random orbit feature gives you a smoother swirl-free finished product as over against the traditional basic finishing sander.
-
Product ID: M9502RG
240Volt
This MAKITA MT Professional series 4-1/2″ angle grinder is ideal for the cost conscious skilled tradesman such as metalworkers, welders and Tilers and is the perfect all-round handy power tool for the construction site.
-
This Chisel is not for concrete, but is great for cutting asphalt and hard ground like abou.
Product ID: 751620-A
Width: 5″
Length: 17-1/2″
-
This bit is for the demolition application in concrete. Also used for work around pipes, wires & conduits.
Product ID: D-17631
Length: 16″
-
General purpose chipping, edging and channeling. To be used for chiseling out chases and deeper, rough spots.
Product ID: D-17647
Length: 16″
-
Much faster general purpose chiseling, edging and channeling. To be used for chiseling out chases and deeper, rough spots.
Product ID: D-29228
Width: 3″
Length: 16″ -
This high quality cutting disc is used on our Makita 2414EN 14” Chop Saw. It cuts through rebar, angle iron and tubular steel quickly and efficiently giving the user great profitability
Product ID/Part No.: A-93859
Size: 14″
Thickness: 1/8″ -
This high quality chuck is designed to fit the Makita SSP MHP161 Hammer Drill.
Product ID: 763161-4
-
This high quality chuck is designed to fit the Makita HP1620 Hammer Drill.
Product ID/Part No.: 763115-1
Size: 1/2″ -
This high quality chuck is designed to fit the Makita HP2050 Hammer Drill. Also ideal to be used with the D-14087 SDS Plus Adaptor here
Product ID/Part No.:193822-6
Size: 1/2″ -
This high quality chuck is designed to fit the Makita LXPH01 Battery Hammer Drill.
Product ID/Part No.: 766008-1
Size: 1/2″ -
This high quality chuck is designed to fit the Makita BHP453 Battery Hammer Drill.
Product ID/Part No.: 763193-1
Size: 1/2″ -
This high quality chuck is designed to fit the Makita BHP454 Battery Hammer Drill.
Product ID/Part No.: 763191-5
Size: 1/2″ -
This specially formulated carbide lasts longer and leaves burr free cuts in all types of non-ferrous metals, such as: aluminum, copper, brass, bronze, and even some plastics.
Product ID/Part No: D-19065
Teeth: 100T
Arbor: 5/8” -
Free!
Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish. Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts. Ultra Thin Kerf .091″, 5 Degree Hook Angle, and .071 Plate Thickness. Great for Crosscutting.
Ideal for: Construction Lumber and Plastics -
Fits model # 2012NB planer.
Disposable, double-edged high-speed steel constructionProduct ID/Part No: 793346-8
Length: 12″ -
Free!
Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish. Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts. Ultra Thin Kerf .091″, 5 Degree Hook Angle, and .071 Plate Thickness. Great for Crosscutting.
Ideal for: Construction Lumber and Plastics
-
0.5mm knotted steel wire 1. Ideal for heavy work and fast cleaning of large surfaces. For weld cleaning and other aggressive applications.
Application: Steel, fabrication, automotive, derusting, deburring, welds.
Features a twist knot wire brush for aggressive effect.Product ID/Part No.: D-26537
Size: 2-1/2″
Arbor: 5/8″-11 -
Product ID:#LCT209W-240
- 12 Volt Lithium Ion Battery Power
- 1x FD02 Cordless Drill
- 1x DT01W Cordless Impact Driver